Calibration method:
Contacting Conductivity:
Zero
GLI DRY-CAL
1-point sample
Inductive Conductivity:
Zero
1-point Cond (or Concentration or TDS)
Concentration curves:
Inductive Conductivity H3PO4: 0-40%
HCl: 0-18%
HCl: 22-36%
NaOH: 0-16%
CaCl2: 0-22%
HNO3: 0-28%
HNO3: 36-96%
H2SO4: 0-30%
H2SO4: 40-80%
Dimensions (H x W x D):
144 mm x 144 mm x 181 mm
Length:
181 mm
Measuring range:
0 - 2.000 mS/cm
0 - 20.00 mS/cm
0 - 200.0 µS/cm
0 - 2000 µS/cm
0 - 9999 ppm
Contacting Conductivity 0 - 2.000 µS/cm
Contacting Conductivity 0 - 20.00 µS/cm
Contacting Conductivity 0 - 200.0 mS/cm
Contacting Conductivity 0 - 999.9 kΩcm
Contacting Conductivity 0 - 9999 ppb
Inductive Conductivity - 2000 mS/cm
Measuring range conductivity:
Contacting Conductivity 0 - 2.000 µS/cm
Measuring range resistivity:
Contacting Conductivity 0 - 19.99 MΩcm
Sensor to Controller Distance:
Inductive Conductivity
Full-scale value
Max Length 200 - 2000 µS/cm max. length 61 m (200ft)
Temperature accuracy:
± 0.5 °C
Temperature compensation:
Automatic from -20 - 200 °C
Automatic from -4 - 392 °F
Temperature compensation curves:
Contacting Conductivity: Linear, Ammonium, Natural Water, user defined, none
Inductive Conductivity: Linear, Natural Water, user defined, none (available curves depend on the selected type of measurement (Conductivity, Concentration or TDS))
Temperature drift:
> 20 µS/cm: ± 0.02 % of reading / °C
Temperature range:
Manual -20 - 200 °C
Temperature sensor:
Contacting Conductivity PT100 / PT1000
Inductive Conductivity PT1000