Amtax sc Ammonium analyser, indoor, 0.05 - 20 mg/L NH₄-N, 1-channel

Amtax sc Ammonium analyser, indoor, 0.05 - 20 mg/L NH₄-N, 1-channel
Product #: LXV421.99.13011
Unit Price Contact Hach

Wide measuring range

Amtax sc Ammonium Analysers are available in four measuring ranges. With detection limits as low as 0.02 mg/L and ranges up to 1000 mg/L, the Amtax sc can be used anywhere in the wastewater treatment process, from the influent or start of the nitrification process with high NH4-N levels to the effluent with only low ammonium levels. In the lowest range it can also be used for drinking water applications.

Fast response time for control of nutrient removal process

Nutrient removal is a critical and sensitive process in wastewater treatment. Quick response is vital for optimal operation. The fast response time of only 5 minutes and selection of the measurement interval, make the Amtax sc one of the fastest responding ammonium analysers on the market.

Easy installation

The Amtax sc Analyser is designed to be installed at the measuring location, including outdoor locations. The housing is weatherproof and lockable so that the analyser can be installed right at the basin, even in the toughest climates.
The Amtax sc easily mounts to a wall, rail- and stand-mounting options are available. Due to its SC technology the anlyser is ready for use in the network of the SC controller ("plug-and-play").

Low maintenance and simple operation

The analyser calibrates and cleans itself automatically and is equipped with comprehensive self-diagnostic routines. With at least a 3-month supply of reagents (for 5 min interval), the Amtax sc analyser offers the most economical reagent consumption. Reagents and wear parts are easily accessible.

Optional with sample preparation or second channel

The Amtax sc analyser works with a low-maintenance filtration system (e.g. Filtrax) that removes particles larger than 0.15 µm. The filtrate is sent to the analyser while air bubbles constantly clean the filtration membrane.
The analyser is also available as two channel version for measurement at two different sampling points.

What's included?

0.05 - 20 mg/L NH₄-N, 230 VAC Amtax sc Ammonium Analyser, 3 month supply of all necessary consumables at 5 minute cycle time, user manuals.

Specifications

Accuracy: Using standard solutions: 3 % + 0.05 mg/L
Cable length: 2 m fixed data cable at analyser
  2 m fixed power cable at analyser
Detection limit: 0.05 mg/L NH4-N
  0.05 mg/L NH4-N
Dimensions (H x W x D): 720 mm x 540 mm x 370 mm
Enclosure waterproof rating: IP54
Filtersystem included: No, use e.g. Filtrax
Flow: 1 - 20 L/h sample (free of suspended solids)
Fuse protection: Via SC1000 controller or power box. Maximum of 2 analysers per SC1000 or power box
Indoor/Outdoor: Indoor
Material: ASA/PC UV-resistant
Measurement method: GSE (Gas Sensitive Electrode) with screw-on membrane cap
Measuring interval: 5 - 120 min, adjustable per 5 min.
Measuring principle: NH4 is being converted to NH3 gas, which is being measured at the GSE.
Measuring range: 0.05 - 20.0 mg/L NH₄-N
Number of channels: 1
Operating humidity: 95% relative humidity, non-condensing
Operating temperature range: 5 - 40 °C
Output: Current output, relays and bus communication via SC controller
Parameter: Ammonium
Permissible Chloride range: Max. Cl- concentration: 1000 mg/L
pH Range: 5 - 9 pH
Power requirements (Hz): 50/60 Hz
Power requirements (Voltage): 115 - 230 V AC, powered by Power Box or SC Controller
Pressure range: -30 - 50 mbar with continuous sample preparation; at overflow vessel
Reproducibility: 2% + 0.05 mg/L
Response time: < 5 minutes
Sample level: Level of liquid in basin with filtration probe must be below analyser
Sample quality: Ultra filtrated or comparable.
Sample temperature: 4 - 40 °C
Sampling option: one channel continuous sample from filtration unit, e.g. FILTRAX
Special Features: Lockable housing; automatic cleaning and calibration; extensive self-diagnostics
Storage conditions: 4 - 55 °C less than 95% relative humidity
Warranty: 24 months
Weight: Without sample preparation system and without chemicals: 29 kg
What's included?: 0.05 - 20 mg/L NH₄-N, 230 VAC Amtax sc Ammonium Analyser, 3 month supply of all necessary consumables at 5 minute cycle time, user manuals.