Accuracy:
± 0.02 pH
Cable connection:
Analog
Cable length:
4.5 m
6 m PUR (polyurethane) 4-conductor with one shield, rated to 105 °C
Calibration method:
Two point automatic, one point automatic, two point manual, one point manual.
Diameter:
34.9 mm
Drift:
0.03 pH per 24 hours, non-cumulative
Electrode type:
General Purpose
Flow:
max. 3 m
Housing material:
PPS
Length:
196.3 mm
Material:
Ground Electrode: Titanium
Measuring range:
-2.0 - 14.0 pH
Mounting:
Convertible
Operating temperature range:
-5 - 105 °C
Pressure range:
max. 10.7 bar Sensor only (pressure range of mounting hardware to be checked separately)
Repeatability:
± 0.05 pH
Sensor thread:
1" NPT at both ends
Special notes:
pH-Wide Range Generic
Temperature accuracy:
± 0.5 °C
Temperature compensation:
Automatic with NTC 300 Ω thermistor, or manually fixed at a user-entered temperature,
additional selectable temperature correction factors (ammonia, morpholine, or user-defined pH/°C linear slope) available for pure water automatic compensation 0.0 - 50 °C
Automatic with NTC 300 Ω thermistor, or manually fixed at a user-entered temperature,
additional selectable temperature correction factors (ammonia, morpholine, or user-defined pH/°C linear slope) available for pure water automatic compensation 0.0 - 50 °C
Temperature sensor:
NTC 300Ohm thermistor for automatic temperature compensation and analyser temperature readout
Warranty:
24 months
Weight:
0.9534 kg