New: NP6000sc Phosphate Analyser, HR, 2 channels, for use with 2 external filtration systems, flow detection, 230 VAC

NP6000sc Phosphate Analyser, HR, 2 channels, for use with 2 external filtration systems, flow detection, 230 VAC
Product #: LXV462.99.33211
Unit Price Contact Hach

Confidence in compliance through accurate data

Ensure your operations stay ahead of compliance requirements with the NP6000sc Phosphate Analyser. It is designed for continuous monitoring and precise measurement across three ranges (0.015 - 75 mg/L PO4-P), offering lab-grade accuracy and SCADA integration. With real-time data and detailed flow and maintenance insights, the NP6000sc delivers the information needed to optimise processes and support technical decision-making you can trust.

Grab Sampling: Consistency from Lab to Process

The NP6000sc Phosphate Analyser eliminates the uncertainty caused by discrepancies between lab results and online analysers by aligning measurements for consistent and reliable data. Its grab sample feature ensures compliance with regulatory standards while maintaining precise process control. With trusted, accurate readings, you can confidently avoid penalties and keep operations running smoothly.

Robust and lightweight filtration options

Benefit from light construction, improved air cleaning and innovative flow detection with the FX610 filtration system and rugged FX620. These features ensure reliable functionality and reduced operational touchpoints. Plus, you’ll have confidence in your results with the ability to remotely check that your sample is consistently supplied to your analyser.

What's included?

NP6000sc Phosphate Analyser, Mounting Hardware, User Manual

Specifications

Accuracy: With Standard Solution:
2% of the measured value + 1.0 mg/L
Altitude: 2000 m maximum
Cable length: Standard: 2 m cable fixed from the edge of the enclosure
Extension cables are available as an option (data cable up to 50 m, power cable up to 5 m).
Certifications: CE, UKCA, CMIM, FCC, ISED, certified to UL and CSA safety standards by TÜV
Controller compatibility: Digital SC Controller. Controllers are sold separately.
Detection limit: 1 mg/L PO₄-P
Dimensions (H x W x D): 991 mm x 575 mm x 425 mm
Enclosure waterproof rating: Rating: IP55, NEMA 3R UL50E
Material: PUR 66
Filter Configuration: Use e.g. Filtrax
Flow rate: 0.5 - 20.0 L/h
Indoor/Outdoor: Indoor or outdoor use
Measurement method: Photometric (Ortho-phosphate ions react with vanadate-molybdate reagent and form a yellow dye.)
Measuring interval: 5, 10, 15, 20 or 30 minutes (user adjustable)
Measuring range: 1 - 75 mg/L PO₄-P
Number of channels: 2
Operating temperature range: -20 - 45 °C; 95% relative humidity, non-condensing
Options: Flow detection
Output: Relay, analog outputs, network interface through SC Controller
Parameter: Orthophospate
Permissible Chloride range: ≤ 1000 mg/L Cl-
pH Range: 5 - 9 pH
Pollution degree: 2
Power requirements (Voltage): 230 V AC
Power supply: Mains power supplied by SC Controller or LQV155 power box.
Analyser and heated drain tubing: 230 VAC
Protection class: Class I
Repeatability: With Standard Solution:
2% of the measured value + 1.0 mg/L
Response time: 90% per measurement cycle for PO₄–P > 0.2 mg/L
80% per measurement cycle for PO₄–P ≤ 0.2 mg/L
Sample pressure: 2.5 bar (0.25 mPa) maximum
Sample quality: Ultra filtrated or comparable
Sample temperature: 4 - 40 °C
Special remarks: The liquid level in the basin must be below the bottom of the analyser.
Storage conditions: -20 - 60 °C; 95% relative humidity, non-condensing
Warranty: 24 months
Weight: Approximately 45 kg without chemicals
What's included?: NP6000sc Phosphate Analyser, Mounting Hardware, User Manual