Solitax highline sc Turbidity (0.001-4000 NTU) and Suspended Solids (0.001-500 g/L) built-in probe, w/o wiper, stainless steel

Solitax highline sc Turbidity (0.001-4000 NTU) and Suspended Solids (0.001-500 g/L) built-in probe, w/o wiper, stainless steel
Product #: LXV424.99.02200
Unit Price Contact Hach

Colour-independent measurement of solids

Hach Solitax sc sensors provide accurate, colour-independent measurement of turbidity and suspended solids in drinking water, wastewater and industrial process applications. A self-cleaning device prevents biological growth and interference of gas bubbles. This system’s reliable performance and full data communication capability help improve process control and reduce treatment costs associated with polymer use, digester volume, and sludge handling.

No calibration

Solitax sc sensors show an exceptional correlation to laboratory analysis. On-line measurement not only saves time on manual analysis, but also provides critical real-time measurements that can be used to operate the plant more efficiently.

Excellent correlation to laboratory analysis

Conventional turbidity and suspended solids sensors are potted and are discarded when they no longer function. Solitax sc sensors are fully serviceable, which often doubles the useful life of the sensor.

Decrease polymer cost, digester volume and sludge hauling

Factory calibrated in conformity with DIN EN ISO 7027 for long-term calibration stability. Calibration is easy with a simple correction factor procedure.

Improve overall efficiency of the plant

Multiple Solitax sc sensors can be installed on one Hach SC Controller. The same controller can also accommodate any combination of parameters. All of Hach’s model sc sensors are “plug and play” with no complicated wiring or set-up procedure necessary.

What's included?

Turbidity/Suspended Solids probe, user manual

Specifications

Accuracy: Turbidity up to 1000 NTU:
without calibration < 5% of the measured value ±0.01 NTU
with calibration < 1% of the measured value ±0.01 NTU
Automatic wiper: No
Body Material: Stainless Steel
Cable length: 10 m (optional extension cables available)
Calibration method: Turbidity: Formazin or STABLCAL Standard (at 800 NTU).
Suspended Solids: Sample specific, based on gravimetric TSS analysis with a correction factor procedure.
Certifications: CE
Controller: Sensor only
Diameter: 60 mm
Flow: Max. 3 m/s (the presence of air bubbles affects the measurement)
Length: 315 mm
Maintenance interval: 1 h/month
Material: Optics Carrier and Sleeve: stainless steel 1.4571
Max. cable length Sensor-to-Controller: 100 m
Measuring principle: Infrared Duo scattered light technique for color-independent
turbidity measurement Turbidity in accordance with
DIN EN ISO 7027 / TS equivalent DIN 38414
Measuring range: TSS-content: 0.001 - 500 g/L; 0.001 - 500,000 mg/L (the upper range is dependent on the sample property)
Turbidity: 0.001 - 4000 NTU
Model: Solitax highline sc
Mounting: Insertion
Operating temperature range: 0 - 40 °C
Parameter: High Range Suspended Solids, Turbidity
Pressure range: Stainless steel insertion sensor: <6 bar or <60 m
Repeatability: TSS content: < 3 %
Turbidity: < 1 %
Response time: 1 - 300 s adjustable
Special notes: Installation note:
Distance sensor-wall
> 50 cm (Turbidity)
Warranty: 24 months
Weight: Insertion stainless steel: 2.4 kg (5.29 lb.)
What's included?: Turbidity/Suspended Solids probe, user manual