
Water Analysis for Secondary Treatment of Wastewater

Biological or Chemical Treatment to Remove Nutrients and Suspended Solids
Secondary treatment removes the soluble organic matter, nutrients such as nitrogen and phosphorus and most of the suspended solids that escape primary treatment.
Biological Secondary Treatment Processes
Most often, biological processes are used in which microbes metabolize organic compounds and nutrients to grow and reproduce. There are two common biological secondary treatment processes
- Suspended growth systems
- Attached growth systems
Suspended Growth Systems
A suspended growth process fosters the growth of suspended microorganism flocs from individual organisms already present in the wastewater and in the return activated sludge.
The flocs contain organisms that can remove the pollutants through aerobic, anoxic and anaerobic environments. Once the pollutants are removed, the flocs are sent to a secondary clarification process where they separate from the water via gravity. A portion of sludge in the bottom of the secondary clarifier is then directed back upstream to blend with the primary effluent (Return Activated Sludge) to create mixed liquor. The remainder of the sludge is removed from the process (Waste Activated Sludge) to create the ideal ecology of microorganisms.
Attached Growth Systems
Attached growth systems rely on the microorganisms to attach to a media and create a biofilm. The settled sewage is either mixed or sprinkled over the biofilm coated media where the microorganisms remove the pollutants. Like the suspended growth process, biofilm fragments and suspended flocs are sent to a secondary clarifier for separation where sludge is recycled and wasted and clean water is discharged to the next process.

Organisms Require Nutrients in a Balanced Ratio
For biological treatment to function efficiently, organisms require nutrients in a balanced ratio, including:
- Carbon
- Nitrogen
- Phosphorus (referenced as C:N:P)
Additionally, the following elements are typically present in wastewater:
- Iron
- Copper
- Zinc
- Nickel
- Manganese
- Potassium
- Sulfur
The commonly accepted C:N:P Ratio is 100:5:1, although some facilities thrive outside of this ratio, while others experience polysaccharide slime formation or filamentous bacteria growth that inhibit the biology and settling in the secondary clarifier.
Multiple biological processes can be employed to complete secondary treatment. These processes include:
- Plug flow aeration basins
- Complete mix aeration tanks
- Sequencing batch reactors
- Oxidation ditches
- Trickling filters
- Moving bed biological reactors
- Integrated fixed film activated sludge
Biological Nutrient Removal (BNR)
Biological Nutrient Removal (BNR) alters the environment of the microorganisms to remove nitrogen and phosphorus from the water. A BNR process consists of anaerobic (no oxygen or nitrate), anoxic (no oxygen, nitrate is present) and aerobic (oxygen present) stages, during which the water is moved through a series of chambers to perform various biological functions.
Chemical treatment processes can also be used, such as the chemical removal of phosphorus. By introducing a chemical precipitant within the aeration basin and clarifiers, phosphorus is removed by flocculation, binding into insoluble compounds that settle out and can be removed as sludge.
Customer Challenges
Nitrogen Management
Nitrification Process
- Aeration is typically the most energy consuming process in a wastewater facility
- Understanding Influent Nitrogen load changes is key to optimizing nitrification and treatment costs
- Maintaining an optimal environment (alkalinity, SRT, pH, etc.) is essential for stable microbiology and efficient removal of nutrients
Denitrification Process
- Bacteria need carbon to reduce nitrate to nitrogen gas. If external carbon sources are required (ex. Methanol, Ethanol etc.), managing chemical usage as conditions change will reduce costs and prevent under or overdosing
- Maintaining anoxic conditions (no soluble oxygen) is important
- Improper Internal Mixed Liquor Recycle rates can reduce denitrification and cause downstream challenges
Side stream Management
- High nutrient loads from dewatering/thickening processes and decanting of digesters
- If not managed appropriately lead to problems that upset processes and can increase effluent Nitrogen concentration
- Short-cut nitrogen removal processes (i.e. Annamox, Demon)
Phosphorus Management
Chemical removal of Phosphorus
- Optimal levels of chemical dosing (ex. metal salts i.e. Ferric, Alum) are necessary to manage costs
- Underdosing leads to possible permit compliance issues; overdosing leads to increased costs and possible UV system degradation
Biological removal of Phosphorus:
- Maintaining anaerobic conditions (No oxygen, no NO3, no NO2); to ensure maximum phosphorus release
- Maintaining aerobic conditions to ensure maximum phosphorus uptake
- P-release in downstream process (secondary clarification, digestion, etc.)
Side stream Management
- High loadings from dewatering/thickening process and decanting of digesters
- If not managed appropriately lead to problems that upset process, compliance in regard to Phosphorus
- Increase in chemical expenses if not treated properly
Organic Management
Managing Energy Costs
Over aeration impacts downstream processes; unexpected organic slug loads
Secondary Clarification
Mixed Liquor Suspended Solids (MLSS)
Once a day grab sample offers an incomplete picture of the process: Inaccurate visibility to daily concentrations leads to confusion about current process conditions, introduces error and lag time for process control, grab samples may not be representative, lab test may have been improperly performed, and inconsistency between operators and or shifts
Understanding sludge age, seasonal, and diurnal changes for effective treatment
- Inaccurate/incorrect SRT steals treatment capacity which can lead to compliance issues – BOD, Ammonia, Phosphorus, Total Nitrogen.
- Inaccurate/incorrect SRT can lead to filamentous bacteria concerns: Filaments can create bulking and foaming issues. When chlorine is used for controlling overgrowth it also inhibits good bacterial composition

