Stationary sampler using pressure-vacuum technology. With robust PE housing, microprocessor controlled refrigeration system and easy to clean sample bottles. Operates in time-, volume- (flowproportional), or event-based mode. Compared to peristaltic methods the pressure-vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube. The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes. The tropicalised cooling system ensures a sample storage at 4 °C up to an ambient temperature of 43 °C. Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken. The pressure-vacuum sampler is ISO 5667 compliant and therefore satisfies the requirements for subsequent reproducible analysis. For use in sewage treatment, industrial facilities and for monitoring surface waters.
Stationary sampler using pressure-vacuum technology. With robust PE housing, microprocessor controlled refrigeration system and easy to clean sample bottles. Operates in time-, volume- (flowproportional), or event-based mode. Compared to peristaltic methods the pressure-vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube. The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes. The tropicalised cooling system ensures a sample storage at 4 °C up to an ambient temperature of 43 °C. Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken. The pressure-vacuum sampler is ISO 5667 compliant and therefore satisfies the requirements for subsequent reproducible analysis. For use in sewage treatment, industrial facilities and for monitoring surface waters.
Can't find the combination you need?
Explore the Buehler Stationary Samplers family to find the right product for your requirements.
BM6004625 Liter PE composite container with cap for Buehler Stationary Sampler
Overview
Stationary sampler using pressure-vacuum technology. With robust PE housing, microprocessor controlled refrigeration system and easy to clean sample bottles. Operates in time-, volume- (flowproportional), or event-based mode. Compared to peristaltic methods the pressure-vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube. The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes. The tropicalised cooling system ensures a sample storage at 4 °C up to an ambient temperature of 43 °C. Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken. The pressure-vacuum sampler is ISO 5667 compliant and therefore satisfies the requirements for subsequent reproducible analysis. For use in sewage treatment, industrial facilities and for monitoring surface waters.
Pressure-vacuum principle: Highly accurate sample volume
The sampler functions according to the pressure vacuum-principle and operates in time, volume (flow-proportional), or event-based mode. Compared to peristaltic methods the pressure vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube.
Lightweight, corrosion-free PE housing
The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes. Depending on the configuration the sampler's weight is approx. 60kg. Therefore installation locations can be changed without difficulty.
Tropicalised cooling system
The tropicalised cooling system ensures a sample storage at 4°C up to an ambient temperature of 43°C. Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken.
Cost effective to buy and maintain
No consumables are needed. Maintanance free pressure vacuum technology plus maintanance free motor driven valve system & motor driven pinch valve. It is not necessary to change the pump tubing or other pneumatic parts periodically.
Easy to clean sample container
Cleaning of the multiple bottle sample container takes 50% less time compared to wedge shaped bottles.
Applications
Discharge
Flow Monitoring
Groundwater
Industrial Wastewater
Specifications
Type of distributorRobust round distributor
Housing materialMade of PE with 50 mm insulation/Styrosun/PC (GF10) housing; separated in lower part (sample compartment) and upper part (controller and dosing system). Each part with lockable door resp. roof. Protective hood (made of Styrosun) which can be opened for operation of the control unit and service at the dosing unit.
PE
Cooling principleActive cooling
Bottle filling time1 min - 999 h 59 min
Documents & Downloads
Brochures
Brochure
Product Information Stationary & Portable Samplers
Stationary sampler using pressure-vacuum technology. With robust PE housing, microprocessor controlled refrigeration system and easy to clean sample bottles. Operates in time-, volume- (flowproportional), or event-based mode. Compared to peristaltic methods the pressure-vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube. The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes. The tropicalised cooling system ensures a sample storage at 4 °C up to an ambient temperature of 43 °C. Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken. The pressure-vacuum sampler is ISO 5667 compliant and therefore satisfies the requirements for subsequent reproducible analysis. For use in sewage treatment, industrial facilities and for monitoring surface waters.
Pressure-vacuum principle: Highly accurate sample volume
The sampler functions according to the pressure vacuum-principle and operates in time, volume (flow-proportional), or event-based mode. Compared to peristaltic methods the pressure vacuum technology ensures high volume accuracy (due to dosing vessel). There is no wearing out of the sample tube.
Lightweight, corrosion-free PE housing
The temperature controlled, weatherproof housing made of PE plastic ensures failure free operation over many years. Even under conditions where stainless steel usually corrodes. Depending on the configuration the sampler's weight is approx. 60kg. Therefore installation locations can be changed without difficulty.
Tropicalised cooling system
The tropicalised cooling system ensures a sample storage at 4°C up to an ambient temperature of 43°C. Thus the sample is refrigerated to exclude biological and chemical changes. To avoid cross contamination, the system is rinsed before and after each sample is taken.
Cost effective to buy and maintain
No consumables are needed. Maintanance free pressure vacuum technology plus maintanance free motor driven valve system & motor driven pinch valve. It is not necessary to change the pump tubing or other pneumatic parts periodically.
Easy to clean sample container
Cleaning of the multiple bottle sample container takes 50% less time compared to wedge shaped bottles.
Applications
Discharge
Flow Monitoring
Groundwater
Industrial Wastewater
Specifications
Type of distributorRobust round distributor
Housing materialMade of PE with 50 mm insulation/Styrosun/PC (GF10) housing; separated in lower part (sample compartment) and upper part (controller and dosing system). Each part with lockable door resp. roof. Protective hood (made of Styrosun) which can be opened for operation of the control unit and service at the dosing unit.
PE
Cooling principleActive cooling
Bottle filling time1 min - 999 h 59 min
Documents & Downloads
Brochures
Brochure
Product Information Stationary & Portable Samplers
Cooling systemSelf-contained, controlled cooling / heating with 4 settings, no-frost. independent of the programmable controller, temperature in sample compartment: 4 °C (adjustable from 0.0 - 9.9 °C)
Housing typeStationary
Power Requirements (Voltage)115/230 V AC
Sampler typeStationary
Languages user interfaceMulti-language, selectable
Sample containerPlastic: 1 x 25 L; 1 x 50 L; 2 x 10 L; 4 x 10 L; 4 x 14 L; 12 x 2.9 L; 24 x 1.0 L Glass: 12 x 2.0 L; 24 x 0.9 L
Data storage3000 entries, non-volatile data memory; storage of sampling and malfunction data like sample extractions, bottle changes, messages, external signals
Warranty24 months
Sample temperature0 - 40°C (32 - 104°F)
CommunicationOptional: PC via Software Further communication options on request.
Inputs1 x analogue: 0/4-20 mA 2 x digital (flow, event), Impulse length 60 ms, switching level 7-24 V, max. working resistance 500 Ohm, max. length of signal cable 30 m
Program Stop OptionsEnd of sampling program after one program run; continuous operation or x- runs, and a certain date / time
Housing details- Double-walled PE plastic with 50 mm insulation - Roof and cover material: Styrosun (GFK) - Cover lifted by gas-shock absorbers, wind safe - Easy to maintain - Suction inlet from right-hand side of housing
Suction hose inner diameter (mm)10 mm
DescriptionBuehler 301X Stationary Water Sampler, Reinforced Plastic Enclosure
Programs12 freely programmable user programs, with function to link programs
Status messagesStandard: collective malfunction error message Optional: Sampling, programme active, programme end message
Sample transport velocity>0.5 m/s at suction height up to at least 8 m (at 1013 hPa); pump performance can be adjusted electronically
Dimensions1100 (1640*) mm x 760 mm x 745 mm (H x W x D), * with opened top
Influent for Wastewater
Municipal Water
Pre-Treatment
Primary Treatment
Production Water
QA/QC Lab
Regulations
Secondary Treatment
Source Water
Surface Water
Storm Water
Water Cycle
Water Reuse
Suction Hose Outer Diameter13 mm
Suction HeightMax. 7.5 m (at 1013 hPa and stagnant medium), optional higher
Housing insulation materialPUR
WeightApprox. 75 kg with composite container, higher weight when using multi bottle option and/or glass bottles Stirrer: 750 g
Ambient temperature-20 - 43 °C
Sample interval1 min to 99 h 59 min in steps of 1 minute 1 to 9999 pulses/sample
Cooling systemSelf-contained, controlled cooling / heating with 4 settings, no-frost. independent of the programmable controller, temperature in sample compartment: 4 °C (adjustable from 0.0 - 9.9 °C)
Housing typeStationary
Power Requirements (Voltage)115/230 V AC
Sampler typeStationary
Languages user interfaceMulti-language, selectable
Sample containerPlastic: 1 x 25 L; 1 x 50 L; 2 x 10 L; 4 x 10 L; 4 x 14 L; 12 x 2.9 L; 24 x 1.0 L Glass: 12 x 2.0 L; 24 x 0.9 L
Data storage3000 entries, non-volatile data memory; storage of sampling and malfunction data like sample extractions, bottle changes, messages, external signals
Warranty24 months
Sample temperature0 - 40°C (32 - 104°F)
CommunicationOptional: PC via Software Further communication options on request.
Inputs1 x analogue: 0/4-20 mA 2 x digital (flow, event), Impulse length 60 ms, switching level 7-24 V, max. working resistance 500 Ohm, max. length of signal cable 30 m
Program Stop OptionsEnd of sampling program after one program run; continuous operation or x- runs, and a certain date / time
Housing details- Double-walled PE plastic with 50 mm insulation - Roof and cover material: Styrosun (GFK) - Cover lifted by gas-shock absorbers, wind safe - Easy to maintain - Suction inlet from right-hand side of housing
Suction hose inner diameter (mm)10 mm
DescriptionBuehler 301X Stationary Water Sampler, Reinforced Plastic Enclosure
Programs12 freely programmable user programs, with function to link programs
Status messagesStandard: collective malfunction error message Optional: Sampling, programme active, programme end message
Sample transport velocity>0.5 m/s at suction height up to at least 8 m (at 1013 hPa); pump performance can be adjusted electronically
Dimensions1100 (1640*) mm x 760 mm x 745 mm (H x W x D), * with opened top